Continuous flow methods for evaluating the response of a copper ion selective electrode to total and free copper in seawater

This work describes the development of an instrument for measuring free and total copper in seawater by continuous flow analysis (CFA) with an Orion copper (II) ion selective electrode (CuISE). Sample analysis times are reduced considerably by using an extrapolation technique based on the fitting of an empirical mathematical expression to the electrode time-response curve enabling a prediction of the final equilibrium potential. CuISE measurements in seawater samples containing nanomolar levels of total copper can be very time consuming, and this predictive approach significantly reduces sample analysis time, and improves sample throughput. The time taken to measure pCu in seawater to a precision of +/- 0.1, using conventional potentiometry, varies considerably depending on the condition of the electrode membrane but can be reduced by a factor of 3-6 (typically from 60 to 10 min) by using the extrapolation technique in conjunction with CFA. Details are given of the protocols used for preconditioning the CuISE. The system can be used as a portable instrument for field measurements or for shipboard measurements of free copper in seawater. Extrapolated equilibrium potentials are within +/- 0.5 mV of true steady state values.     

Evaluation of the respicon as a personal inhalable sampler in industrial environments

The Respicon has been introduced as a sampler for health related measurements of airborne contaminants at workplaces. The instrument is aimed at simultaneous collection of three health related aerosol fractions: (a) the coarser inhalable fraction, defining the aerosol fraction that may enter the nose and mouth during breathing; (b) the intermediate thoracic fraction, defining the fraction that may penetrate beyond the larynx and so reach the lung; and (c) the finer respirable fraction, defining the fraction that may penetrate to gas exchange region of the lung. The instrument has a number of features attractive to occupational hygienists: in addition to providing the three aerosol fractions simultaneously, it is light and compact enough to be used as a personal sampler. yet can be a tripod mounted for area sampling, it can provide samples not only for gravimetric analysis but also microscopic and chemical analyses; and it is also available in a photometric direct-reading version. The instrument has previously been evaluated as an area sampler and, in this mode of operation, has shown reasonable accuracy in collecting respirable, thoracic and inhalable particles, the latter up to particle diameters of ca. 80 microm. Except for some scattered unpublished data there exist no systematic investigations in the Respicon's performance when used as a personal sampler in the industrial environment. In this paper, we will report on a study of side by side comparison of the Respicon with the IOM inhalable sampler, regarded as a reference instrument for the inhalable fraction. The main study was performed at six different workplaces in a nickel refinery. Statistical analysis of the gravimetrically-determined concentration data reveals consistently lower aerosol exposure values for the Respicon as compared to the IOM sampler. The data for the nickel workplaces are compared with findings from other studies. The results are interpreted in the light of the overall results and the possibility of introducing a correction factor is discussed.     

Verteilungskoeffizienten chlorierter Kohlenwasserstoffe zwischen Muskulatur und Leber bei Fischen

Zusammenfassung  Lipidbezogene Verteilungskoeffizienten (KL_M/L) zwischen Muskelkonzentrationen-(C_ML) und Leberkonzentrationen (C_LL) zweier Friedfischarten Brassen (Abramis brama) und Aalmutter (Zoarces viviparus) ergeben theoriekonform (KL_M/L=C_ML/C_LL=1) nominale Werte um 1 für persistente (hochchlorierte PCB) und Werte über 1 für metabolisierbare lipophile Umweltchemikalien wie chlorierte Cyclohexane oder DDT.      

Investigation of interactions between surface water and petroleum-type pollutants

Background, Aims and Scope In oil spill investigations, one of the most important steps is a proper choice of approaches that imply an investigation of samples taken from different sedimentary environments, samples of oil contaminants taken in different periods of time and samples taken at different distances from the oil spill. In all these cases, conclusion on the influence of the environment, microorganisms or migration on the oil contaminants' composition can be drawn from the comparison of chemical compositions of the investigated contaminants. However, in case of water contaminants, it is very important to define which part of organic matter has been analyzed. Namely, previous investigations showed that there were some differences in chemical composition of the same oil contaminant depending on the intensity of its contact with ground water. The aim of this work is to define more precisely the interactions between oil contaminant and water, i.e. the influence of the intensity of interaction between the oil contaminant and water on its chemical composition. The study was based on a comparison of four fractionated extracts of an oil pollutant, after they had been analyzed in details. Methods Oil polluted surface water (wastewater canal, Pančevo, Serbia) was investigated. The study was based on a comparison of four extracts of an oil contaminant: extract 1 (decanted part), and extracts 2, 3 and 4 (extracted by shaking for 1 minute, 5 minutes and 24 hours, respectively). The fractionated extracts were saponified with a solution of KOH in methanol, and neutralized with 10% hydrochloric acid. The products were dissolved in a mixture of dichloromethane and hexane, and individually fractionated by column chromatography on alumina and silica gel (saturated hydrocarbon, aromatic, alcohol and fatty acid fractions). n-Alkanes and isoprenoid aliphatic alkanes, polycyclic alkanes of sterane and triterpane types, alcohols and fatty acids were analyzed using gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). δ13CPDB values of individual n-alkanes in the aliphatic fractions were determined using gas chromatography-isotope ratio monitoring-mass spectrometry (GC-irmMS). Results and discussion. Extracts 1 and 2 are characterized by uniform distribution of n-alkanes, whereas extract 3 is characterized by an even-numbered members dominating the odd-ones, and extract 4 showed a bimodal distribution. Extract 1 is characterized by the least negative δ13CPDB values of C19-C26 n-alkanes. Sterane and triterpane analysis confirmed that all extracts originated from the same oil contaminant. n-Fatty acids, C19-C24, in all extracts are very low, being somewhat higher in extract 4. Even-numbered n-alcohols, C12–C16, were identified in the highest concentration in extract 3. It was assumed that algae were responsible for the composition of extract 3. Furthermore, a possible reason for higher concentrations of C19–C26 n-alkanes and C19–C24 fatty acids in extract 4 is the formation of inclusion compounds with colloidal micelles formed between the oil contaminant's NSO-compounds and water. Conclusion It was undoubtedly confirmed that there were specific differences in the compositions of the different extracts depending on the intensity of the interaction between the oil contaminant and the surface water. Recommendation and Outlook. When comparing the composition of oil contaminants from different water samples (regardless of the ultimate investigation goal) it is necessary to compare the extracts isolated under the same conditions, in other words, extracts that were in the same or very similar interaction with water.     

Regulatory off-gas analysis from the evaporation of Hanford simulated waste spiked with organic compounds

After strontium/transuranics removal by precipitation followed by cesium/technetium removal by ion exchange, the remaining low-activity waste in the Hanford River Protection Project Waste Treatment Plant is to be concentrated by evaporation before being mixed with glass formers and vitrified. To provide a technical basis to permit the waste treatment facility, a relatively organic-rich Hanford Tank 241-AN-107 waste simulant was spiked with 14 target volatile, semi-volatile, and pesticide compounds and evaporated under vacuum in a bench-scale natural circulation evaporator fitted with an industrial stack off-gas sampler at the Savannah River National Laboratory. An evaporator material balance for the target organics was calculated by combining liquid stream mass and analytical data with off-gas emissions estimates obtained using U.S. Environmental Protection Agency (EPA) SW-846 Methods. Volatile and light semi-volatile organic compounds (<220 degrees C BP, >1 mm Hg vapor pressure) in the waste simulant were found to largely exit through the condenser vent, while heavier semi-volatiles and pesticides generally remain in the evaporator concentrate. An OLI Environmental Simulation Program (licensed by OLI Systems, Inc.) evaporator model successfully predicted operating conditions and the experimental distribution of the fed target organics exiting in the concentrate, condensate, and off-gas streams, with the exception of a few semi-volatile and pesticide compounds. Comparison with Henry's Law predictions suggests the OLI Environmental Simulation Program model is constrained by available literature data.     

Modeling radium and radon transport through soil and vegetation

A one-dimensional flow and transport model was developed to describe the movement of two fluid phases, gas and water, within a porous medium and the transport of 226Ra and 222Rn within and between these two phases. Included in this model is the vegetative uptake of water and aqueous 226Ra and 222Rn that can be extracted from the soil via the transpiration stream. The mathematical model is formulated through a set of phase balance equations and a set of species balance equations. Mass exchange, sink terms and the dependence of physical properties upon phase composition couple the two sets of equations. Numerical solution of each set, with iteration between the sets, is carried out leading to a set-iterative compositional model. The Petrov-Galerkin finite element approach is used to allow for upstream weighting if required for a given simulation. Mass lumping improves solution convergence and stability behavior. The resulting numerical model was applied to four problems and was found to produce accurate, mass conservative solutions when compared to published experimental and numerical results and theoretical column experiments. Preliminary results suggest that the model can be used as an investigative tool to determine the feasibility of phytoremediating radium and radon-contaminated soil.     

A FAST RECURSIVE GIS ALGORITHM FOR COMPUTING STRAHLER STREAM ORDER IN BRAIDED AND NONBRAIDED NETWORKS1

ABSTRACT: Stream ordering is a useful property of every river network, having a wide range of applications. A method for determining stream orders that quickly and easily addresses various network topologies and magnitudes is therefore needed. This paper introduces a general recursive stream ordering framework for vector hydrography. It also presents a linear, O(n), stream ordering procedure for braided river networks, which is a major improvement to the existing quadratic, O(n²), procedure. The discussion includes results and interpretations, and the appendices present procedure pseudocodes and thorough line by line explanations.     

The Analysis of Sustainability Indicators as Socially Constructed Policy Instruments: benefits and challenges of 'interactive research'

Sustainability indicator sets are increasingly being discussed on the policy level as fruitful contributions to the improvement of political decision- making and to the implementation of programs oriented towards the achievement of strategic goals of sustainable development. The vast number of different indicator type tools, their varying contexts of use and their differing objectives indicate that there is no simple answer to what sustainable indicator type tools should look like or could be used for. Instead, more than the final products (e.g. a specific indicators set), the analyses of the discourse on this topic reveal a lot of information. Thus, an innovative research approach is recommended focusing on understanding the production of social meaning and processes of social interaction within political-administrative systems. Firstly, there is a need to identify the development, purpose and use of sustainability indicator sets, which depend on the different interests of policy actors, their relationships and existing governance structures. Secondly, one should identify any reasons for the ineffective use of indicator sets where the goals of sustainability are concerned. The approach of 'interactive research' understood as a research process, in which 'researchers' and 'practitioners' develop knowledge for solving problems in a communicative, reflexive and collaborative way, facilitates this challenging research task. This paper critically examines the approach of interactive research and sheds some light on benefits as well as challenges of it via extracting the lessons learnt in an EU-funded project called 'Promoting Action for Sustainability through Indicators at the Local Level in Europe' (PASTILLE), which applied an interactive research approach.     

EFFECT OF PRICE ON THE RESIDENTIAL DEMAND FOR WATER WITHIN AN AGENCY1

ABSTRACT: This paper develops a model that can be used to forecast the residential elasticity of demand for water within a district. Long-term water conservation programs and revenue and cost decisions hinge crucially on a determination of this elasticity. This study then pools cross-sectional (census) and time series data to generate elasticity forecasts for the Oakland urban area.